How to write a structural engineer resume summary
Two or three sentences: building types, size and licence.
- Structural engineer in training (entry level)
- EIT designing steel, concrete and wood framing for buildings up to five storeys.
- Project engineer, PE (mid level)
- PE leading design of 11 healthcare and school buildings worth $180 million.
- Principal, SE (senior)
- Principal SE leading a 30-person office of a national firm; principal on a 62-storey tower.
| Instead of | Write |
|---|---|
| Detail-oriented structural engineer with strong analysis skills. | PE and engineer of record on four retrofits, including an occupied 1960s hospital wing. |
A named project and what you signed show responsibility a skills claim can't.
Summary or objective?
Use a summary at every level.
Graduates can open with: "Structural engineering master's graduate, FE passed, seeking a building design role."
Moving from bridges to buildings, or the other way? Lead with the materials and analysis both share, and name the codes you'd design to in the new work.
Resume headline examples
Put your title and licence under your name.
- Structural Engineer (EIT) | Commercial Buildings (Entry)
- Structural Engineer, PE | Healthcare and Education (Mid)
- Structural Engineer, PE | Seismic Retrofit (Specialty)
- Principal Structural Engineer, SE | Tall Buildings (Senior)
Experience bullets that show results
Give the building, its size and what your design did.
| Instead of | Write |
|---|---|
| Designed buildings. | Designed steel, concrete and wood framing for nine buildings up to five storeys. |
| Did a retrofit. | Led the structural retrofit of a 1960s hospital wing kept open during work. |
| Saved steel. | Cut steel tonnage 9% on a lab building through framing studies. |
| Was engineer of record. | Engineer of record on four retrofits and tenant improvements; project engineer on 11 buildings worth $180 million. |
| Grew the office. | Grew office fees from $5 million to $11 million in eight years. |
| Ran seismic design. | Designed the lateral system for a 12-storey concrete building in a high-seismic zone, approved by peer review first time. |
| Checked shop drawings. | Reviewed 150 shop drawing submittals a year, catching connection errors before fabrication. |
| Designed foundations. | Designed drilled-shaft and mat foundations for a hospital tower on soft clay, working from the geotechnical report. |
Missing a number? Write a bracket now, such as "designed the lateral system for a [X]-storey building worth $[Y] million", and check the figure in your own records before you send.
Bullet ideas by area
Bullets for the work most often hired for. Swap in your figures where the brackets are and keep only the work you have done.
Design
- Designed [material] framing for [X] buildings
- Cut [steel / concrete] [X]% through [study]
Seismic and retrofit
- Designed the lateral system for a [X]-storey [material] building
- Led retrofit design for [building] with [result]
Delivery
- Project engineer on [X] buildings worth $[Y] million; engineer of record on [Z]
- Reviewed [X] shop drawings a year
Leadership
- Led [X] engineers
- Mentored [X] engineers through the PE
Foundations and site structures
- Designed [drilled-shaft / mat / pile] foundations for [building] on [soil]
- Designed [retaining walls / pipe racks / equipment supports] for [site or plant]
Skills and keywords for a structural engineer resume
Group skills by design, codes and software.
Design
Steel, Concrete, Wood, Masonry, Foundations
Codes
ASCE 7, AISC 360, ACI 318, IBC
Software
ETABS, RAM, RISA, Revit
Delivery
Calculation packages, Construction administration
Matching the structural engineer job description
Posts name materials and building types. Lead with matching projects.
If a post names codes, such as ASCE 7 or ACI 318, show yours.
Seismic posts want lateral design work. Give yours.
Bridge posts name AASHTO LRFD and state DOT manuals; building posts name the IBC and material codes. Use the ones you've designed to.
Certifications and how to list them
Structural engineers need a PE to sign plans, and some states also require a separate SE licence. The FE exam is the usual first step.
| Credential | Earned | In progress |
|---|---|---|
| Fundamentals of Engineering (FE) examNCEES | Passed FE exam, NCEES, [year]; Engineer in Training, [state] | FE exam scheduled, [month year] |
| Professional Engineer (PE) licenceYour state licensing board (exam by NCEES) | Professional Engineer, [state], [year] | PE exam scheduled, [month year] |
| Structural Engineer (SE) licenceYour state licensing board (exam by NCEES) | Structural Engineer, [state], [year] | PE Structural exam scheduled, [month year] |
- Fundamentals of Engineering (FE) exam: NCEES runs the FE exam on computer. Passing it is the usual first step toward a PE licence; your state board grants the in-training title, so list the state. NCEES, FE exam
- Professional Engineer (PE) licence: NCEES writes the PE exam, but the licence comes from the board in the state where you practise. Don't put PE after your name until the board has granted it. NCEES, PE exam
- Structural Engineer (SE) licence: Some states, such as Illinois, license structural engineers (SE) separately from the PE. NCEES writes the PE Structural exam, though not every state accepts it toward licensure, so check with your board. NCEES, PE Structural exam
PE, SE, a master's or an MBA: what helps
Licensure comes first: FE, experience under a licensed engineer, then the PE, and the SE where your state requires it.
A master's in structural engineering is common in design firms. List it with the field and year.
An MBA or MEM helps if you're moving toward firm leadership or development; for design careers the PE and SE count more.
In progress? Write "PE Structural exam scheduled, [month year]" or "MS, Structural Engineering, [school], expected [year]".
Structural Engineer resume with no experience
New to the field? Internships, co-ops and design projects count. Civil engineers, including structural engineers, typically need a bachelor's degree.
- Give your design project's building and result.
- List internships with the firm.
- Name analysis software.
- Note the FE exam and EIT status.
- Add a master's in progress if you have one.
Moving up: EIT, project engineer and principal
As an EIT or design engineer, you're read for calculations, models, drawings and software.
A project engineer with a PE or SE is judged on what you signed: projects, materials and clients.
Associates and principals are read for clients, fees, the team and a portfolio. Give office size and fees if you run an office.
Structural engineer resume format and length
One page suits EITs and most engineers through mid level; principals can use two, plus a project list on a separate page.
Give building type, material and storeys in each project bullet, so a reader can scan your range.
A plain, conservative design suits structural firms.
Questions
Should I list codes?
Yes, in context: "designed to ASCE 7-22, ACI 318 and AISC 360". Codes show you can do the work safely and legally. Name the ones the post names, and any seismic or wind design you've done. Give the edition where it matters, such as ASCE 7-22.
What about the SE licence?
List it with the state once the board grants it, such as "SE, Illinois", on the same line as your PE states. If you're working toward it, give the exam date: "PE Structural exam scheduled, April 2027". Firms that design hospitals and tall buildings in those states check for it early, so put it in your headline as well as under licences.
Do I need a master's as a structural engineer?
Not to start, but check the posts you want, because many design roles list it as preferred. If you hold one, give the field and year, and a line on the thesis if it matches the work, such as seismic design or connection testing. Part-time students can give the expected date.
Should I add a project list?
Yes, for experienced engineers. Give name, building type, material, storeys or construction value, your role and year, on a separate page. Keep the main resume for your biggest results. Group small projects, such as tenant fit-outs, into one line with a count.
How do I show team work?
Name the project and your part: "designed the lateral system" or "checked the steel connections". Don't claim the whole building. Readers know structures are designed by teams and look for what you signed or led. Expect interview questions on your part, so name work you can talk through in detail.
Which software should I list?
Analysis and design tools such as ETABS, SAP2000, RAM, RISA, Tekla or Revit. Name them as the post does, and give one project where you used each. Put analysis tools first, because posts usually name them before drafting tools. Add BIM tools if you coordinate models with architects.
How do I show foundation, bridge or industrial work?
Name the structure and the system: "designed micropile underpinning for a school addition" or "designed pipe racks and equipment supports for a gas plant". Give the governing code, such as AASHTO LRFD for bridges or ACI 350 for tanks, and the geotechnical inputs you worked from. Building firms and industrial owners read for different codes, so lead with the one the post names.
How do I list what I sealed versus what I designed?
Keep the two apart. Use "engineer of record" only for drawings you sealed, and "designed" or "led design" for work a principal sealed. A line such as "engineer of record on three parking structures; project engineer on two hospital towers" is honest and still shows scale. Interviewers and reference checks often ask which drawings carry your seal.