ClayCV

Architect resume examples

By Gaurav Sharma. Updated .

An architect resume should show what you built, at what size, and what part you led. Give the building type, square footage or construction cost and the phases you worked on, then show licensure plainly. While you log AXP hours, readers look for drawings and software. At associate principal level they look for fees, clients and the team.

Daniel Okafor, Project architect, eight years, healthcare and education

Why Crown works for this architect resume

  1. Licence named with the state. "Licensed architect in Ohio" answers the first screening question before the reader reaches the jobs.
  2. Cost control as a figure. Change orders at 2.6% of construction cost shows the documents held up in the field.
  3. Licence in its own section. Keeping the licence separate from skills makes it easy to find and check.
Read Daniel's resume as text

Daniel Okafor, Project Architect

daniel.okafor@example.com | (614) 555-0147 | Columbus, OH

Summary

Licensed architect in Ohio with eight years in healthcare and higher-education work. Leads drawing production and consultant coordination on projects up to $60 million, runs construction administration, and keeps change orders under 3% of construction cost.

Experience

Project Architect, Contoso Architects | Columbus, OH, Mar 2021 – Present

  • Lead documentation for a $60 million, 110,000 sq ft outpatient centre with a team of five
  • Run construction administration on two projects, reviewing 600 submittals and closing RFIs in an average of four days
  • Kept change orders to 2.6% of construction cost on the outpatient centre through tighter coordination sets
  • Coordinate structural, MEP and medical equipment consultants in weekly model reviews
  • Wrote the specification sections for doors, hardware and casework with the spec writer
  • Led a code review with the state health department that passed with no redesign
  • Mentor three designers through their AXP hours

Architectural Designer, Contoso Architects | Columbus, OH, Jun 2018 – Feb 2021

  • Produced construction documents for a 90,000 sq ft university science building
  • Built the Revit template and families now standard across the office
  • Prepared LEED documentation for a building certified Gold
  • Led site observation visits and wrote field reports

Junior Designer, Litware Design | Cincinnati, OH, Jun 2017 – May 2018

  • Drew permit sets for six retail tenant fit-outs
  • Measured and modeled existing conditions for four renovations
  • Prepared client presentation renderings in Enscape

Education

University of Cincinnati | Cincinnati, OH, Aug 2015 – May 2017

  • Master of Architecture, Architecture

University of Cincinnati | Cincinnati, OH, Aug 2011 – May 2015

  • Bachelor of Science, Architecture

Certifications

Licensed Architect, Ohio | Ohio Architects Board, Sep 2020

Skills

Delivery

Construction documents, Construction administration, Specifications, Code review

Software

Revit, Navisworks, Bluebeam, Enscape

Sectors

Healthcare, Higher education

Everyone and every company in these examples is fictional, and the figures are there to show how a good bullet is built, not to set a standard.

How to write an architect resume summary

Two or three sentences: your licence status, project types and size, and one delivery result.

Architectural designer (entry level)
Architectural designer with two years on multifamily and civic projects from schematic design to construction documents. Passed three of six ARE 5.0 divisions.
Project architect (mid level)
Licensed architect in Ohio with eight years in healthcare and higher education. Leads documentation on projects up to $60 million.
Associate principal (senior)
Licensed architect leading a 14-person studio and a $4.5 million fee portfolio across civic and campus work.
Instead ofWrite
Creative and passionate architect with a strong eye for design and excellent technical skills.Licensed architect in Ohio leading documentation on a $60 million outpatient centre, with change orders held to 2.6% of construction cost.

Give a licence, a project size and a cost result, because an employer can check all three.

Summary or objective?

Use a summary once you have worked on real projects, including internships.

An objective helps when moving in from another field: "Interior designer with NCIDQ Certification moving into architecture; completing an M.Arch and AXP hours."

Resume headline examples

Put your title and focus under your name. Only use "Architect" if you are licensed.

  • Architectural Designer | Revit, construction documents (Entry)
  • Project Architect | Healthcare, construction administration (Mid)
  • Architect | K-12 and civic buildings (Sector)
  • Associate Principal | Civic and campus studio lead (Senior)

Experience bullets that show results

Name the project, its size or cost, your part, and a result such as schedule, budget or approval.

Instead ofWrite
Worked on construction documents.Produced Revit models and drawing sets for a 180-unit, five-storey multifamily building through construction documents.
Did construction administration.Reviewed 600 submittals and closed RFIs in an average of four days on two projects in construction.
Managed budgets.Kept change orders to 2.6% of construction cost on a $60 million outpatient centre.
Helped win projects.Won four public commissions worth $2.1 million in fees through interviews and qualification packages.
Improved workflow.Built a Dynamo script that tags doors across the model, saving about six hours per drawing issue.
Worked on code compliance.Wrote the code analysis for a 90,000 sq ft mixed-use building, including egress, fire separation and accessible routes, with no plan review comments on life safety.
Coordinated consultants.Ran weekly coordination with structural, MEP and civil consultants on a $38 million school, closing 140 model clashes before the permit set.

Missing a number? Write a bracket now, such as "documented a $[X] million [building type] of [Y] sq ft through [phase]", and check the figure in your project records before you send. If you can't fill a bracket, rewrite the bullet around what you can show.

Bullet ideas by area

Bullets for the work most often hired for. Swap in your figures where the brackets are and keep only the work you have done.

Design and documentation
  • Produced [drawing sets / details] for a [X] sq ft [building type] through [phase]
  • Coordinated [X] consultants and closed [Y] clashes before issue
Construction administration
  • Reviewed [X] submittals and answered [Y] RFIs, averaging [Z] days
  • Kept change orders to [X]% of construction cost
Practice and leadership
  • Led a team of [X] on a $[Y] million [building type]
  • Won [X] commissions worth $[Y] in fees
Sustainability and codes
  • Prepared LEED documentation for a [X] sq ft [building type] that earned [level]
  • Wrote code analysis for [X] projects with [result] at plan review

Skills and keywords for an architect resume

Group skills by stage of the work. Firms read for Revit depth and construction experience first.

Design

Programming, Schematic design, Design development, SketchUp, Rhino

Documentation

Revit, AutoCAD, Construction documents, Specifications

Construction

Construction administration, Submittals, RFIs, Site observation

Coordination

Navisworks, Bluebeam, Consultant coordination

Codes

IBC, ADA Standards, Energy code

Matching the architect job description

Read the ad for project type and phase. A healthcare firm wants healthcare projects first; a firm hiring for construction administration wants your CA bullets near the top.

Use the firm's terms for its work, such as "civic" or "public sector", if they describe yours honestly.

If the post names LEED, WELL or Passive House goals, put your sustainable projects and any LEED credential in the top third of the page.

Posts for project architects often ask for a licence or for progress toward one. Put your licence state, or your ARE divisions passed, in the headline or summary.

Certifications and how to list them

According to the U.S. Bureau of Labor Statistics, every state and DC requires architects to be licensed, usually after a degree in architecture, a paid internship of about three years and the ARE. Many states also restrict the title, so check your state board's rules and show your status plainly. LEED is worth adding after the licence, and it suits designers who haven't finished the ARE yet.

CredentialEarnedIn progress
Architect Registration Examination (ARE 5.0)NCARBLicensed architect, [state], [year]ARE 5.0: [X] of 6 divisions passed
LEED Green AssociateU.S. Green Building Council (USGBC)LEED Green Associate, USGBC, [year]LEED Green Associate exam scheduled, [month year]
LEED AP with specialty (such as BD+C)U.S. Green Building Council (USGBC)LEED AP BD+C, USGBC, [year]LEED AP exam scheduled, [month year]
  • Architect Registration Examination (ARE 5.0): ARE 5.0 is NCARB's current exam and has six divisions, which you can take in any order. Your licence comes from your state board, so list the state. NCARB, ARE 5.0
  • LEED Green Associate: USGBC's starting credential for people newer to LEED: a two-hour, 100-question exam. Holders earn 15 continuing education hours every two years. USGBC, LEED Green Associate
  • LEED AP with specialty (such as BD+C): Shows advanced knowledge of one LEED rating system. You need a current LEED Green Associate credential, or can take both exams together. Holders earn 30 continuing education hours every two years. USGBC, LEED AP

M.Arch, MBA or neither: what helps

Your degree is part of licensure, so list it with its accreditation if the post asks. Most architects take a five-year Bachelor of Architecture, many add a master's in architecture, and about two-thirds of states require a degree from an accredited programme.

An MBA is uncommon in design roles and isn't needed to become a principal. Architects who take one tend to move toward development, owner-side project management or running the business side of a firm. If that's your aim, show fee, budget and client results now, since a reader will look for them.

Short courses help more often: a construction administration course, a project management course, or a PMP if you're moving toward project management on the owner side. List them under Professional development with the provider and year.

In progress? Write "M.Arch, [school], expected [year]" or "ARE 5.0: 4 of 6 divisions passed". Firms plan around licensure dates, so give them.

Architect resume with no experience

Your thesis and studio work are your experience. Give each project a short entry with its programme, site, size and the tools you used, and link a portfolio. Internship time during school can count toward the training period most states require before the exam.

  • List internships and fabrication or model shop jobs.
  • Give real sizes for studio projects.
  • Name the software you used to draw them.
  • Note ARE divisions passed or AXP hours logged.
  • Keep the portfolio link in your contact line.

Moving up: designer, project architect and principal

Architectural designers are hired on drawings, software and progress toward a licence. Give the drawing sets you produced, the phases you've worked through and your ARE and AXP status.

Project architects show they can run a job: projects led through documents and construction, the consultants coordinated, and budget or schedule results such as change orders as a share of cost.

Associates and principals are judged on fees, clients and people: the commissions they won, the studio they lead and the size of their portfolio. Early project lists can shrink to a line each.

Licence status and main building types belong in your summary line.

Architect resume format and length

Keep the resume to one or two pages and let your portfolio carry the images.

Use plain text for software and project data so screening software can read them, and send the portfolio as a separate link or PDF.

Questions

Can I call myself an architect before I'm licensed?

Usually not. Many states restrict the title to licensed architects, so use "architectural designer" or your firm's title until you're licensed, and check your state board's rules. You can still show progress: list ARE divisions passed and AXP status in the summary or a licensure line, so a reader knows how close you are.

What is the best certification for an architect?

The licence comes first, and no credential stands in for it. After that, LEED is worth adding. Start with LEED Green Associate if you're new to it, then add LEED AP with a specialty such as BD+C once you've worked on LEED projects. List the specialty, because posts often name it.

Should I list ARE divisions I've passed?

Yes. Write how many of the six you've passed, such as "ARE 5.0: 3 of 6 divisions passed", in a licensure line near the top. It tells a firm you're on the way, and project architect posts often ask for it. Remove the line once you're licensed and give your licence state instead.

Is an MBA worth it for architects?

For most design careers, no. Principals rise through projects, clients and fees. An MBA helps more if you want to move into real estate development, owner-side project management or firm operations. If you hold one, list it under Education and show business results, such as fees or budgets, in your bullets.

Do I need a portfolio as well as a resume?

Yes, almost always. Keep the portfolio short, lead with your best project, and give your part in each one. The resume carries the facts: sizes, phases, budgets and dates. Send the portfolio as a link or a small PDF so the resume stays easy to read and to screen.

How do I list projects I worked on with a team?

Name the project, give its size or cost, and say what you did on it, such as "led construction documents" or "ran CA". Don't claim the whole building. Readers know architecture is a team effort and look for the part that was yours.

What if my projects weren't built?

List them with the phase they reached, such as "through design development" or "competition entry, shortlisted". Unbuilt work still shows your drawings, your software and the building types you know. If a project stopped for funding or other reasons, you don't need to explain it on the resume.

One page or two?

One page suits designers and most project architects with under ten years. Senior architects with long project lists can use two, with recent projects in full and older ones as a short list. Keep images in the portfolio, not the resume.