How to write a mechanical engineer resume summary
Two or three sentences: products, your design area and a result.
- Mechanical engineer I (entry level)
- Mechanical engineer who released 70 drawings and cut a casting's cost 12%.
- Senior mechanical engineer (mid level)
- Senior engineer whose rooftop unit line sells 6,000 units a year.
- Engineering manager (senior)
- Manager leading 28 engineers; launched a $400 million platform.
| Instead of | Write |
|---|---|
| Results-driven mechanical engineer passionate about design. | Senior engineer whose HVAC line sells 6,000 units a year and uses 15% less energy. |
Units sold and the energy saving show the design worked in the field.
Summary or objective?
Use a summary at every level.
Graduates can open with: "Mechanical engineering graduate with two co-op terms in product design."
Moving from product design to building services, or the other way? Say which, and lead with the analysis that carries over, such as heat transfer or fluid flow. Building services employers will also ask about your FE and PE plans.
Resume headline examples
Put your title and product area under your name.
- Mechanical Engineer | Industrial Equipment (Entry)
- Senior Mechanical Engineer | HVAC (Mid)
- Mechanical Engineer | Thermal and CFD (Specialty)
- Engineering Manager | Heavy Equipment (Senior)
Experience bullets that show results
Give the part or product, what you did and the change.
| Instead of | Write |
|---|---|
| Designed parts. | Released 70 part and assembly drawings in SolidWorks with GD&T. |
| Redesigned a housing. | Redesigned a pump housing casting, cutting part cost 12%. |
| Fixed vibration. | Solved a vibration problem that caused 30 field returns. |
| Improved efficiency. | Cut unit energy use 15% against the prior model. |
| Managed engineers. | Led 28 engineers across three product lines. |
| Ran tests. | Planned and ran 120 fatigue tests on a new bracket, cutting field failures 60% after release. |
| Designed HVAC. | Designed HVAC for a 200,000 sq ft office, meeting energy code with 15% margin. |
Missing a number? Write a bracket now, such as "cut part cost from $[X] to $[Y] on [Z] units a year", and check the figure in your own records before you send.
Bullet ideas by area
Bullets for the work most often hired for. Swap in your figures where the brackets are and keep only the work you have done.
Design
- Released [X] drawings
- Cut [cost / weight / parts] [X]%
Analysis and test
- Ran [FEA / CFD] on [part], [result]
- Ran [X] tests on [part], cutting failures [Y]%
- Solved [problem] causing [X] returns
Building systems
- Designed [system] for [X] sq ft, meeting [code]
Leadership
- Led [X] engineers
- Launched [product] selling [X] units a year
Skills and keywords for a mechanical engineer resume
Group skills by design, analysis and software.
Design
GD&T, DFM, Sheet metal, Castings
Analysis
FEA, CFD, Tolerance stack-ups
Software
SolidWorks, Creo, Ansys, MATLAB
Process
DFMEA, ECOs, PLM
Matching the mechanical engineer job description
Product, building services and energy posts read differently. Lead with matching work.
If a post names a CAD tool, put yours in the top third.
Building services posts often want a PE. Show your status.
Name the codes and standards you work to where they apply, such as ASME Y14.5 for drawings or ASHRAE standards for building systems.
Certifications and how to list them
Most product engineers don't need a licence. Building services and consulting roles often want a PE, and engineers need one to offer services directly to the public. The FE exam is the usual first step. Six Sigma belts help in manufacturing.
| Credential | Earned | In progress |
|---|---|---|
| Fundamentals of Engineering (FE) examNCEES | Passed FE exam, NCEES, [year]; Engineer in Training, [state] | FE exam scheduled, [month year] |
| Professional Engineer (PE) licenceYour state licensing board (exam by NCEES) | Professional Engineer, [state], [year] | PE exam scheduled, [month year] |
| Certified Six Sigma Green Belt (CSSGB)ASQ | Six Sigma Green Belt (CSSGB), ASQ, [year] | CSSGB exam scheduled, [month year] |
- Fundamentals of Engineering (FE) exam: NCEES runs the FE exam on computer. Passing it is the usual first step toward a PE licence; your state board grants the in-training title, so list the state. NCEES, FE exam
- Professional Engineer (PE) licence: NCEES writes the PE exam, but the licence comes from the board in the state where you practise. Don't put PE after your name until the board has granted it. NCEES, PE exam
- Certified Six Sigma Green Belt (CSSGB): Many companies run their own belt programmes. Say whether yours is ASQ's certification or an internal belt, and name the project you led. ASQ, certification
PE, a master's, MEM or an MBA: what helps
Your bachelor's in mechanical engineering comes first. Pass the FE early if you work in buildings or consulting, where the PE matters.
A master's helps for analysis, simulation, controls and research roles, where posts often prefer one. Give the field, such as thermal sciences or controls.
Heading into engineering management? A Master of Engineering Management (MEM) keeps the coursework technical. An MBA fits product management, operations and general management, where the work includes finance and strategy.
In progress? Write "MS, Mechanical Engineering, [school], expected [year]" or "PE exam scheduled, [month year]".
Mechanical Engineer resume with no experience
New to the field? Internships, co-ops and design projects count. Mechanical engineers typically need a bachelor's degree.
- Give your design project's product and result.
- List internships with the company.
- Name CAD and analysis tools.
- Add shop or prototyping work.
- Note the FE exam if you've passed it.
Moving up: engineer, senior engineer and manager
As a junior engineer, you're read for CAD, calculations, drawings and test.
A senior or design engineer is judged on ownership: parts or systems you designed, tests and their results.
Leads and engineering managers are read for products, programmes, the team and budgets. Give the number of engineers and the product's volume or sales.
Mechanical engineer resume format and length
One page through mid level; managers can use two.
Link a portfolio from your header rather than adding images to the resume.
A clean, conservative design suits engineering employers.
Questions
Should I list my CAD tools?
Yes, with the ones you use most first, such as SolidWorks, Creo or NX, plus analysis tools such as ANSYS. Give one project for each. Posts screen for the CAD tool by name, so match the post's spelling. If you've moved between CAD tools, say so; it shows you can learn the one they use.
Do I need a PE as a mechanical engineer?
Most product engineers don't. Building services and consulting roles often want one, because you sign drawings for the public. Pass the FE early if you might want the PE, while the coursework is fresh, and list it with the year and state. Product companies rely on design reviews rather than a stamp.
Should I add a portfolio?
It helps for design roles. Link a short portfolio with drawings, models and test results, leaving out anything confidential. Keep images off the resume itself so screening software can read it, and put your strongest project first. A link to a PDF or a simple site works; label each project with your part in it.
How do I show team projects?
Name the product and your part: "designed the cooling system for a 2 kW power unit". Don't claim the whole product. Products are built by teams, so employers look for what you owned, such as a subsystem, a test plan or a cost reduction.
Should I include school projects?
Yes, early in your career, if they show design and test. Give the product, tools and result. Drop them once you have a few years of work. Name your part on team projects, and give test results or a working prototype if you built one.
Is a master's worth it for mechanical engineers?
For analysis, simulation and research posts, often yes; for most design and manufacturing roles, experience counts more. If you hold one, a thesis or project in your target area, such as heat exchangers or robotics, is worth a line. If you're studying part time, give the expected date and the modules that match the post.
How do I show GD&T and tolerance work?
Name the standard and what the work achieved: "toleranced a cast pump housing to ASME Y14.5" or "ran tolerance stack-ups that cut assembly rework on a gearbox". Say whether you set the datums, checked them or both. Employers with machined or cast parts read for it early, so put GD&T in your skills and in at least one bullet.
How do I show HVAC and building systems work?
Give the building type, its size and the result: "designed chilled-water HVAC for a 90,000 sq ft lab building, cutting fan energy 20% with variable air volume". Name the standards you designed to, such as ASHRAE 90.1 or 62.1, and the load and energy tools you used. Consulting firms will also ask which drawings you produced and how often you visited site during construction.