How to write an electrical engineer resume summary
Two or three sentences: system type, size and licence.
- Electrical engineer in training (entry level)
- EIT designing power and lighting for 12 buildings, FE passed.
- Senior electrical engineer (mid level)
- PE leading design on 18 substation projects up to 230 kV.
- Director (senior)
- Director leading 35 engineers; delivered 240 MW across four data centre campuses.
| Instead of | Write |
|---|---|
| Motivated electrical engineer with a passion for power systems. | PE whose protection upgrades cut outage minutes 30% on a feeder circuit. |
Voltage, MW and the number of systems give the reader a scale to measure your work against.
Summary or objective?
Use a summary at every level.
Graduates can open with: "Electrical engineering graduate, FE passed, seeking a building power role."
Resume headline examples
Put title, licence and system type under your name.
- Electrical Engineer (EIT) | Building Power (Entry)
- Senior Electrical Engineer, PE | Substations (Mid)
- Controls Engineer | PLC and SCADA (Specialty)
- Director, Electrical Engineering | Data Centres (Senior)
Experience bullets that show results
Give the system, its size and what your design did.
| Instead of | Write |
|---|---|
| Designed electrical systems. | Designed power, lighting and fire alarm for 12 buildings up to 200,000 square feet. |
| Specified equipment. | Specified switchgear, transformers and generators for a $60 million hospital expansion, working with three vendors. |
| Improved reliability. | Led protection upgrades that cut outage minutes 30% on a feeder. |
| Designed substations. | Lead engineer on 18 substation projects up to 230 kV; engineer of record on six. |
| Led a team. | Led 35 engineers designing data centre power across four regions. |
| Ran studies. | Ran short-circuit, coordination and arc flash studies for 14 sites, with labels and reports accepted by the owner first time. |
| Commissioned systems. | Commissioned switchgear and controls for a 20 MW solar plant, energising on schedule. |
| Designed a product. | Designed the power board for a 2 kW motor drive, passing UL 61800-5-1 certification on the first submission. |
Missing a number? Write a bracket now, such as "designed [X] kV distribution for a [Y] MW site", and check the figure in your project records before you send.
Bullet ideas by area
Bullets for the work most often hired for. Swap in your figures where the brackets are and keep only the work you have done.
Design
- Designed [system] for [X] buildings
- Lead engineer on [X] substation projects up to [Y] kV
Studies
- Ran [short-circuit / arc flash / load flow] studies for [X] sites
- Specified [equipment] for a $[X] million project
Commissioning
- Commissioned [system] for a [X] MW plant on schedule
Leadership
- Led [X] engineers
- Cut design time [X]% with [standard / tool]
Product design
- Designed [board / power stage] for [product], passing [UL / IEC] certification
- Took [product] from prototype to [X] units a year
Skills and keywords for an electrical engineer resume
Group skills by design, studies, software and codes.
Design
Power distribution, Lighting, Controls, Protection
Studies
Short circuit, Arc flash, Load flow
Software
ETAP, SKM, AutoCAD Electrical, Revit
Codes
NEC, NFPA 70E, IEEE standards
Matching the electrical engineer job description
Power, building, controls and electronics posts read differently. Lead with matching systems.
If a post names codes or standards, such as the NEC or IEEE, show yours.
Product posts want design and test; consulting posts want studies and stamped drawings.
Utility posts often name voltage classes and protection schemes. Give yours in the same terms, such as "138 kV" or "distance protection", so a reader and screening software can match them.
Certifications and how to list them
Electrical engineers who sign building or utility designs usually need a PE. Product, electronics and controls roles often don't. Engineers need a PE to offer services directly to the public. The FE exam is the usual first step.
| Credential | Earned | In progress |
|---|---|---|
| Fundamentals of Engineering (FE) examNCEES | Passed FE exam, NCEES, [year]; Engineer in Training, [state] | FE exam scheduled, [month year] |
| Professional Engineer (PE) licenceYour state licensing board (exam by NCEES) | Professional Engineer, [state], [year] | PE exam scheduled, [month year] |
- Fundamentals of Engineering (FE) exam: NCEES runs the FE exam on computer. Passing it is the usual first step toward a PE licence; your state board grants the in-training title, so list the state. NCEES, FE exam
- Professional Engineer (PE) licence: NCEES writes the PE exam, but the licence comes from the board in the state where you practise. Don't put PE after your name until the board has granted it. NCEES, PE exam
PE, a master's, MEM or an MBA: what helps
Your bachelor's in electrical engineering comes first. Pass the FE early if you work in power or buildings, where the PE matters.
A master's helps for power systems, RF, semiconductors, controls research and other specialist roles, where posts often ask for one.
Moving into engineering management while staying technical? A Master of Engineering Management (MEM) fits. An MBA helps more for product management, business development or general management, where the work includes finance and strategy.
In progress? Write "MS, Electrical Engineering, [school], expected [year]" or "PE exam scheduled, [month year]".
Electrical Engineer resume with no experience
New to the field? Internships, co-ops and design projects count. Electrical engineers typically need a bachelor's degree, and co-op programmes help.
- Give your design project's system and result.
- List internships with the firm or utility.
- Name design and simulation tools.
- Add lab or test equipment you've used.
- Note the FE exam if you've passed it.
Moving up: EIT, senior engineer and director
As an EIT or junior engineer, you're read for design work, calculations, software and test.
A senior engineer is judged on ownership: systems you designed and sealed, studies, commissioning and the budgets you kept.
Directors and leads are read for standards, the team, major projects and clients. Give the number of engineers and the size of the programme.
Electrical engineer resume format and length
One page through mid level. A director's resume can run to two.
Engineers in consulting can add a project list with system type, voltage or size, client type and year.
A clean, conservative design suits engineering employers, and keeps every line readable by screening software.
Questions
Should I list voltages and ratings?
Yes. Voltages, MW and system types show scale quickly: "designed 13.8 kV distribution for a 300,000 sq ft data centre". Power and building employers look for them first. Give them once per project rather than in every bullet, and use the units the industry uses, such as kV, MVA or amps.
Do I need a PE as an electrical engineer?
In power, utilities and building design, often yes, because you sign drawings. Product, electronics and controls roles usually don't require one, and design reviews take the place of a stamp. Pass the FE early if you might want the PE, and list your EIT title with the state.
Should I list codes and standards?
Yes, in context: "designed to NEC 2023 and IEEE 1584". Codes show you can design work that passes inspection and keeps people safe. List the ones the post names, with the edition if the post gives one, and add any utility or owner standards you designed to.
How do I show PLC and controls work?
Give the system, the platform and the result: "programmed Allen-Bradley PLCs for a packaging line, cutting changeover by 20 minutes". Name the platforms and HMI or SCADA tools you know, and say whether you wrote new logic or maintained existing code.
Which software should I list?
Design and study tools such as ETAP, SKM, AutoCAD Electrical or Revit, simulation tools such as MATLAB or SPICE, and programming languages if you use them. Name them as the post does, and give one result where a tool mattered, such as an ETAP model that resized a feeder. Leave out tools you used only in coursework once you have work examples.
Is a master's worth it for electrical engineers?
It depends on the field. Research, RF and semiconductor posts often list it as preferred; building design and controls posts rarely do, and the PE counts more there. If you hold one, list it with the field and year, and give the thesis or project topic if it matches the post, such as protection relaying or power electronics.
How do I show product or electronics design work?
Give the product, your part and the test result: "designed the battery management board for an e-bike pack, passing UL 2271 first time". Name the tools, such as Altium or SPICE, and the standards you designed to. Product posts read for design, test and manufacturing support, so give the number of units built if you know it.
How do I list power system studies?
Name the study, the scope and what changed: "ran arc flash and coordination studies for a 40-building campus, relabelling 600 pieces of equipment". Give the software, such as ETAP or SKM, and the standard, such as IEEE 1584 for arc flash. Say what changed after the study, such as new breaker settings or a replaced relay.