ClayCV

Process engineer resume examples

By Gaurav Sharma. Updated .

A process engineer resume should show the process you own, its volume, and what you improved: yield, scrap, downtime or cycle time. Name the process and the statistics you used.

Mattias Oyelaran, Senior process engineer, eight years, semiconductors

Why Minimalist works for this process engineer resume

  1. Tools, volume and yield. Twenty thousand wafers a month and a 2.5-point gain show Mattias's impact.
  2. DOEs counted. Fifteen DOEs show a data-led way of working.
  3. Black Belt. The belt supports the statistics in the bullets.
Read Mattias's resume as text

Mattias Oyelaran, Senior Process Engineer

mattias.oyelaran@example.com | (503) 555-0137 | Hillsboro, OR

Summary

Senior process engineer with eight years in semiconductor etch. Owns three etch tools running 20,000 wafers a month, raised yield 2.5 points on a critical layer and cut tool downtime 30%.

Experience

Senior Process Engineer, Etch, Litware Semiconductor | Hillsboro, OR, Jan 2020 – Present

  • Own three plasma etch tools running 20,000 wafers a month
  • Raised yield 2.5 points on a critical layer with a recipe change
  • Cut unplanned tool downtime 30% with equipment engineering
  • Ran 15 DOEs to qualify a new chemistry
  • Set SPC limits and out-of-control actions
  • Lead two process engineers
  • Present yield results to the fab weekly

Process Engineer, Litware Semiconductor | Hillsboro, OR, Jun 2017 – Dec 2019

  • Qualified two new tools
  • Wrote recipe change controls
  • Cut particle defects 40%
  • Supported 24/7 on-call

Process Engineer, Contoso Electronics | Boise, ID, Jun 2015 – May 2017

  • Supported thin-film deposition
  • Ran SPC
  • Wrote OCAPs

Research Assistant, Oregon State University | Corvallis, OR, Jan 2014 – May 2015

  • Grew thin films
  • Measured with ellipsometry
  • Co-wrote a paper

Education

Oregon State University | Corvallis, OR, Sep 2011 – Jun 2015

  • Bachelor of Science, Chemical Engineering

Certifications

Certified Six Sigma Black Belt (CSSBB) | ASQ, May 2021

Skills

Process

Plasma etch, Thin films, Recipe development, Tool qualification

Statistics

DOE, SPC, Yield analysis

Software

JMP, Python, Fab MES

Leadership

Engineer mentoring, Cross-team reviews

Everyone and every company in these examples is fictional, and the figures are there to show how a good bullet is built, not to set a standard.

How to write a process engineer resume summary

Two or three sentences: process, volume and one result.

Process engineer (entry level)
Engineer who cut product giveaway 2% on three fillers.
Senior process engineer (mid level)
Senior engineer owning three etch tools; raised yield 2.5 points.
Manager (senior)
Manager of 22 engineers; raised cell yield from 85% to 94%.
Instead ofWrite
Analytical process engineer skilled in optimisation.Senior engineer who raised yield 2.5 points on tools running 20,000 wafers a month.

Volume and yield points show what optimisation meant on your line.

Summary or objective?

Use a summary at every level.

Graduates can open with: "Chemical engineering graduate with a food plant internship."

Moving between industries, such as food to pharma or semiconductors to batteries? Lead with the methods that carry over, such as SPC, DOE and root cause, and name the regulated systems you've worked under.

Resume headline examples

Put title and process under your name.

  • Process Engineer | Food and Beverage (Entry)
  • Senior Process Engineer | Semiconductor Etch (Mid)
  • Process Engineer | Pharmaceuticals (Specialty)
  • Process Engineering Manager | Batteries (Senior)

Experience bullets that show results

Give the process, the change and the number.

Instead ofWrite
Tuned fillers.Cut product giveaway 2% on three fillers by tuning weights.
Improved yield.Raised yield 2.5 points on a critical layer with a recipe change.
Cut downtime.Cut unplanned tool downtime 30% with equipment engineering.
Ran experiments.Ran 15 DOEs to qualify a new chemistry.
Cut scrap.Cut scrap cost $18 million a year across two cell lines.
Improved capability.Raised a sealing step's Cpk from 0.9 to 1.5 by tightening temperature control, ending 100% inspection.
Fixed a recurring fault.Found the root cause of a recurring filler jam, cutting stoppages from 12 a week to two.
Wrote documents.Wrote the PFMEA and control plan for a new coating line, passing the customer's process audit first time.

Missing a number? Write a bracket now, such as "raised first-pass yield from [X]% to [Y]% on [Z] units a week", and check the figure in your own records before you send.

Bullet ideas by area

Bullets for the work most often hired for. Swap in your figures where the brackets are and keep only the work you have done.

Yield
  • Raised yield [X] points on [process]
  • Raised first-pass yield from [X]% to [Y]% with a DOE
Capability
  • Raised Cpk on [step] from [X] to [Y]
Uptime
  • Cut unplanned downtime [X]% on [lines]
Leadership
  • Led [X] engineers
  • Ramped [line] to [capacity]

Skills and keywords for a process engineer resume

Group skills by process, statistics and software.

Process

Filling, Etch, Coating, Batch processing

Statistics

DOE, SPC, Capability

Software

JMP, Minitab, Python

Quality

Change control, Root cause, FMEA

Matching the process engineer job description

Posts name the process: chemical, semiconductor, food, pharma or metals. Lead with matching work.

If a post asks for SPC or DOE, give a project that used it.

Regulated posts, such as pharma or food, want validation work. Give yours.

Fab and battery posts often name the tool type or process step, such as etch or coating. Use the same words where they're true for you.

Continuous chemical and refining posts read for P&IDs, HAZOP and management of change. Name the reviews you took part in.

Certifications and how to list them

Process engineers rarely need a licence. Six Sigma belts are common, and regulated industries value validation and GMP training.

CredentialEarnedIn progress
Certified Six Sigma Green Belt (CSSGB)ASQSix Sigma Green Belt (CSSGB), ASQ, [year]CSSGB exam scheduled, [month year]
Certified Six Sigma Black Belt (CSSBB)ASQSix Sigma Black Belt (CSSBB), ASQ, [year]CSSBB exam scheduled, [month year]
  • Certified Six Sigma Green Belt (CSSGB): Many companies run their own belt programmes. Say whether yours is ASQ's certification or an internal belt, and name the project you led. ASQ, certification
  • Certified Six Sigma Black Belt (CSSBB): ASQ's Black Belt certification. Put the savings from your projects in your bullets, not next to the belt. ASQ, certification

Six Sigma, MEM or an MBA: what helps

Your bachelor's in chemical, mechanical or materials engineering comes first. Show the statistics you use on real processes.

Belts are common: a Green Belt for running projects, a Black Belt for leading programmes. Name the issuer, ASQ or your company, and the project result. In pharma and food, validation and GMP training count as much.

Moving toward production or operations management? A MEM or an MBA helps; for senior technical roles, a master's in your discipline counts more.

Plants seldom require a PE. It helps only for consulting or design you sign.

Process Engineer resume with no experience

New to the field? Co-ops, internships and lab projects count. Show the processes and data tools you've used.

  • Give your capstone or lab project's process and result.
  • List co-ops with the plant.
  • Name statistics tools.
  • Add equipment you've run.
  • Show a yield or scrap result.

Moving up: engineer, senior engineer and manager

As a process engineer, you're read for data, troubleshooting and the process you support.

A senior engineer is judged on projects: yield, capability and the changes you led.

Managers are read for programmes, the team and results across lines or tools. Give the number of engineers and the combined yield or cost result.

Process engineer resume format and length

Keep to one page through mid level; managers can use two.

Give volumes once per job, in the first bullet, and let the rest show results.

A clean, conservative design suits plants and fabs.

Questions

Should I give volumes?

Yes, if they're not confidential: units, tonnes or wafers a week. Volume shows the scale you work at. If figures are private, give relative results, such as yield points gained. Give it once, near the top of the job, so each later result has a scale.

How do I show confidential yield data?

Give the change in points or percent, not the absolute yield if it's secret: "raised first-pass yield 6 points on the main line". Leave out recipes and customer names. Say whether you changed the process or ran the analysis, so the result is clearly yours.

Should I list statistics tools?

Yes: SPC, designed experiments and capability analysis, with tools such as Minitab or JMP. Give one result where you used them, such as a DOE that raised yield. Statistics are core to process work, and posts often ask for them.

Process or chemical engineer: which title should I use?

Use your real title, and match the post's wording in your headline if it describes your work honestly. Many process engineers hold chemical engineering degrees, so the two titles overlap. The bullets matter more than the title: name the process, the volume and the result, and a reader will see the fit.

Should I list on-call work?

Briefly, if it shows ownership: "on call for two lines, cutting average response time to 20 minutes". It shows you keep a process running day to day. Give the number of lines or tools you cover. Fabs and continuous plants treat on-call cover as part of owning a process.

How do I show control plans and change control?

Name the document and what it controlled: "wrote control plans for three etch steps" or "ran change control for 40 recipe changes with no customer escapes". Say whether you owned the document or contributed to it. Regulated and automotive posts read for these first, because they show a process stays in control after you hand it over.

Which certifications help process engineers?

A Six Sigma Green or Black Belt, plus validation or GMP training in regulated industries such as pharma and food. Give the project with each, such as a scrap reduction, so a reader sees how you used it. Put the belt under certifications and its project result in your bullets for that job.

How do I show uptime and equipment work?

Give the tools or lines, the measure and the change: "cut filler stoppages by a third with a spare parts review". Say whether you worked with maintenance or ran the fix yourself, and name the method, such as root cause analysis or a preventive maintenance plan. Fab and continuous-plant posts read for uptime as closely as for yield.