How to write a chemical engineer resume summary
Two or three sentences: process, scale and one result.
- Chemical engineer I (entry level)
- Engineer supporting reactors and distillation; raised a column's yield 3%.
- Senior process engineer (mid level)
- Senior engineer who led four tech transfers to 4,000-litre scale.
- Director (senior)
- Director leading 40 engineers; delivered a $250 million expansion.
| Instead of | Write |
|---|---|
| Dedicated chemical engineer with strong problem-solving skills. | Senior engineer who cut a crystallisation cycle 18% at 4,000-litre scale. |
Name the unit or product and give the scale in litres, tonnes or batches, so the result has something to measure against.
Summary or objective?
Use a summary at every level.
Graduates can open with: "Chemical engineering graduate with a refinery internship, seeking a process role." Follow it with your senior design project and any co-op work.
Moving between industries, such as from petrochemicals to pharmaceuticals? Lead with the unit operations both share, such as distillation, crystallisation or heat transfer, and the safety or quality systems you've worked under.
Resume headline examples
Put your title and industry under your name.
- Chemical Engineer | Specialty Chemicals (Entry)
- Senior Process Engineer | Pharmaceuticals (Mid)
- Process Safety Engineer | PSM (Specialty)
- Director of Process Engineering | Petrochemicals (Senior)
Experience bullets that show results
Give the unit, the change and the result.
| Instead of | Write |
|---|---|
| Improved yield. | Raised a column's product yield 3% by tuning reflux and feed point. |
| Did scale-up. | Led tech transfer of four drug substances from lab to 4,000-litre scale. |
| Cut cycle time. | Cut a crystallisation step's cycle time 18% with a new cooling profile. |
| Handled deviations. | Investigated 30 batch deviations and closed the corrective actions, halving repeat deviations in a year. |
| Saved energy. | Cut energy use per tonne 12% in five years with heat integration on the distillation train. |
| Supported start-up. | Wrote operating procedures and trained 24 operators for a new coating line, reaching design rate in six weeks. |
| Led a safety review. | Led a HAZOP for a new solvent recovery unit, closing 42 actions before start-up. |
| Handled permits. | Wrote the air permit change for a new solvent recovery unit, keeping site emissions under the permit cap through start-up. |
Missing a number? Write a bracket now, such as "raised yield on [unit] from [X]% to [Y]% at [Z]-litre scale", and check the figure in your project records before you send.
Bullet ideas by area
Bullets for the work most often hired for. Swap in your figures where the brackets are and keep only the work you have done.
Process
- Raised [yield / throughput] [X]% on [unit]
- Cut energy per tonne [X]% with [change]
Scale-up
- Scaled [process] from a [X]-litre pilot to a [Y]-litre reactor
- Transferred [X] processes from lab to plant
Safety and environment
- Led a HAZOP for [unit], closing [X] actions
- Closed [X] PHA or MOC actions on time
- Prepared [air / water] permit changes for [unit]
Leadership
- Led [X] engineers
- Delivered a $[X] million capital project [on time / under budget]
Skills and keywords for a chemical engineer resume
Group skills by process, safety, quality and software.
Process
Distillation, Reactors, Heat transfer, Scale-up
Safety
PSM, HAZOP, MOC
Quality
cGMP, Validation, CAPA
Software
Aspen HYSYS, Aspen Plus, JMP
Matching the chemical engineer job description
Plant, design and research posts read differently. Plant roles want troubleshooting and uptime, design roles want simulation and equipment sizing, and research roles want experiments and scale-up. Lead with the matching work.
Name the industry the post names, such as specialty chemicals, pharma or energy, if you've worked in it.
If a post asks for process safety work, put your HAZOP or PSM experience high. Pharma and food posts read for cGMP, validation and deviations instead.
Use the post's terms for equipment and methods where they're true for you, such as "batch reactors", "Aspen Plus" or "PSM", because screening software matches them by name.
Certifications and how to list them
Most plant engineers don't need a PE, though it helps in consulting and design, and a PE is needed to offer services directly to the public. The FE exam is the usual first step. Six Sigma belts are common in manufacturing, and process safety training is worth listing.
| Credential | Earned | In progress |
|---|---|---|
| Fundamentals of Engineering (FE) examNCEES | Passed FE exam, NCEES, [year]; Engineer in Training, [state] | FE exam scheduled, [month year] |
| Professional Engineer (PE) licenceYour state licensing board (exam by NCEES) | Professional Engineer, [state], [year] | PE exam scheduled, [month year] |
| Certified Six Sigma Green Belt (CSSGB)ASQ | Six Sigma Green Belt (CSSGB), ASQ, [year] | CSSGB exam scheduled, [month year] |
- Fundamentals of Engineering (FE) exam: NCEES runs the FE exam on computer. Passing it is the usual first step toward a PE licence; your state board grants the in-training title, so list the state. NCEES, FE exam
- Professional Engineer (PE) licence: NCEES writes the PE exam, but the licence comes from the board in the state where you practise. Don't put PE after your name until the board has granted it. NCEES, PE exam
- Certified Six Sigma Green Belt (CSSGB): Many companies run their own belt programmes. Say whether yours is ASQ's certification or an internal belt, and name the project you led. ASQ, certification
PE, a master's, MEM or an MBA: what helps
Your bachelor's in chemical engineering comes first; list it with the school and year. Pass the FE early if you might want a PE later. NCEES designs the PE exam for engineers with at least four years of work after their degree.
A master's in chemical engineering helps for research, modelling and specialist roles such as process safety or catalysis. Research and development posts often ask for a PhD.
A Master of Engineering Management (MEM) suits chemical engineers moving into project or engineering management. An MBA helps more if you're aiming at plant management, business development or general management, where the work includes finance and strategy.
In progress? Write "MS, Chemical Engineering, [school], expected [year]" or "PE exam scheduled, [month year]".
Chemical Engineer resume with no experience
New to the field? Co-ops, internships and your senior design project count. Chemical engineers typically need a bachelor's in chemical engineering, and co-op programmes give practical experience.
- Give your design project's process, scale and result.
- List co-ops and internships with the plant or lab.
- Name simulation and data tools you've used.
- Add lab methods and safety training.
- Note the FE exam if you've passed it.
Moving up: engineer, senior engineer and director
As a new engineer, you're read for unit operations, plant data and troubleshooting: the units you support and the problems you solved on them.
At senior level the reader wants ownership: projects you led, yield or energy results, tech transfers and the safety reviews you ran.
Directors and principal engineers are judged on capital projects, the team and results across a site or product line. Give the project value and the number of engineers you lead.
Chemical engineer resume format and length
One page through mid level. Directors and principal engineers with many capital projects can use two.
If you've led several capital projects, add a short project list after your experience: name, value, your role and the year.
A clean, conservative design suits plants and labs. Skip charts and photos, so screening software reads every line.
Questions
Should I give plant capacity?
Yes, if it's not confidential: tonnes a year, batch size or units. Capacity shows the scale you work at. If figures are private, give relative results instead, such as "raised yield 4 points on the main line". Give the number once, in the summary or the first bullet of the job, rather than in every line.
How do I list safety work?
Give the reviews and results: HAZOPs led, PSM work, actions closed, incident rates. A line such as "led a HAZOP for a new solvent unit, closing 42 actions before start-up" shows the skill. Name the method, such as HAZOP, LOPA or management of change, so a reader searching for it finds it, and say whether you led the review or took part.
Do I need a PE as a chemical engineer?
Most plant engineers don't. Engineers need a PE to offer services directly to the public, so it helps most in consulting and design firms where you sign drawings. Pass the FE soon after your degree if you might want a PE later, while the material is fresh, and list it with the year and the state.
Should I list research?
Yes, if it's close to the job: the question, the methods and the result. Industry readers want results they can use. Lead with what changed, such as a faster route or a higher yield, and keep papers to a short list at the end. Name the lab or pilot equipment you ran, because it shows you can move work toward the plant.
How do I show confidential work?
Describe the process and result without trade secrets: "cut energy use 12% on a distillation train". Give changes in percent or points rather than absolute rates, and leave out formulas, recipes and customer names. A hiring manager would worry if a resume gave away a past employer's secrets.
How do I show environmental and permit work?
Name the permit, the unit and the result: "led the wastewater permit renewal for a resin plant, with no new limits added". Give emissions or waste results as a change, such as a cut in VOCs per tonne, and name the programmes you worked under, such as Title V. Plant posts often pair environmental work with process safety, so keep them near each other.
Which software should I list?
Process simulation tools such as Aspen Plus or HYSYS, data tools such as JMP, Python or MATLAB, and control systems such as DeltaV if you use them. Name them as the post does, and give one result where a tool mattered, such as a simulation that sized a new column. Leave out tools you've only seen in class once you have work to show.
How do I show capital project work?
Give the project's value, your part and how it finished: "process lead on a $40 million capacity expansion, started up two weeks early". Say which stages you owned, such as front-end design, equipment specification, construction support or start-up. Readers judge capital work by schedule and budget, so give both if you can.